3 Gang Smart WiFi Touch Switch
€43.05
(Inc. VAT)
€35.00
(Ex. VAT)
No Battery, No Wiring, No Wi-Fi, Self-Powered Smart Switch & Dimming Controller Receiver for House Lighting & Appliances
Description
Phone Pairing
1. After downloading APP, follow the prompts to register the account.
2. The phone and APP pair need to use the home wireless router.
3. Turn on the power of the controller and confirm that the indicator light rapidly blinks.
4. Follows the prompts to select the controller model for quick pairing.
5. If the controller is not rapidly blinks, follow the prompts to set the receiver to rapidly blinks.
Switch Ordinary Pairing
1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Press down the switch key, the indicator light will go out, which means that the pairing is successful.
3. WS1018: If the pairing switch is push button switch and the lamp is dimming, long press the switch to adjust brightness of the lamp.
Switch Direction Pairing
1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Quickly press the switch twice (within 0.5 seconds) the indicator light will go out, which means that the pairing is successful.
3. Rocker switch after direction pairing means always *upside--Off/ downside--On.
4. Push button switch left and right two keys as a group, press the right key to ON, press the left key to OFF. WS1018 in dimming mode keep press the right key to brighten, keep press the left key to dim.
Clean pairing information
1. Long press the pairing button for 13 seconds, the indicator light flashing until it goes off.
2. After the pairing information is cleared, the pairing switch is no longer valid. Need to be repaired to use.
Replace the fuse
After the fuse blows, first remove the fault and replace the same fuse.
Specifications
Product Model: WS1018
Voltage Range: 85~260V 50/60Hz
Power Rating: WS1018: LED 100W (1A)
Temperature Range: -20~50°C
Effective Range: 160m(Outdoor) | 30m(Indoor)
Communication: WI-Fi & Ebelong1.1
Capacity: Up to 10 Switches can be paired
Sensitivity: -110dBm
Dimension: L70*W44*H29mm
Standards: EN61058-1;2002+A2;2008; GB 14536.1-2008